BEST PIPELINE EQUIPMENT CO.,LTD
Your one stop shop for all your piping needs such as Seamless & Welded Carbon / Stainless & Alloy Steel Pipes, Mainly alloy Steel Pipes , Forged Flanges, Butt Weld Fittings, Forged Fittings,
Add to Cart
Труба газлифтная из стали марки 09г2с и область ее применения Все типоразмеры изготавливаются в точном соответствии с
Product Name : DIN 17172 Grade StE 210-7 Carbon Steel Seamless Pipes are also known as mild steel pipes and tubes
DIN 17172 Grade StE 210-7 Carbon Steel Seamless Pipes are certified with Mill test Certificate in accordance with En 10204 Type 3.1/3.2. Where 3.2 indicates In-stage inspection by independent inspection agencies like TUV, DNV, BVQS, LLOYDS & EIL.
IBR, NACE MR 0175,NACE MR 0103, HIC, IGC, IMPACT are adhered as supplementary testing requirements for DIN 17172 Grade StE 210-7 which can be fulfilled with a government approved NABL laboratory.
DIN 17172 Grade StE 210-7 Pipes are supplied in varnished condition in order to prevent formation of rust.
DIN 17172 Grade StE 210-7 Pipes are used mainly for automobile sectors, interior & exterior architectural structures, water pipe lines, Gas lines, Oil & Gas industries etc.
DIN 17172 Grade StE 210-7 Specification
DIN 17172 Grade StE 210-7 Carbon Steel Seamless Pipes are also known as mild steel pipes and tubes.
DIN 17172 Grade StE 210-7 Pipes, are low-cost Low Carbon Steel Pipes with max 017 % carbon content with combination of min 035 % manganese easy to form and shape .These pipes are manufactured as per
DIN Specification and commercially referred as cs pipes or ms pipes.Low Carbon Steel Pipes are not as hard as hig carbon steel pipes,Though carburizing can increase its surface hardness.
| Chemical Properties | |||||||||
| Carbon | Silicon | Manganese | Phosphorous | Sulphur | Molybdenum | Nickel | Chromium | Copper | Others |
| max 0.17 | max 0.45 | min 0.35 | 0.04 | 0.035 | – | – | – | – | – |
| Mechanical Properties | |||||||||
| Yield Strength | Tensile Strength | Elongation A5 min | |||||||
| MPa min | ksi min | MPa min | MPa min | ksi min | Percentage | ||||
| 440 | – | – | 26 | ||||||
| Equivalent Designation | |||||
| DIN | EN | BS | NFA | ASTM | ASME |
| DIN 17172 Grade StE 210-7 | – | – | – | – | – |
DIN 17172 Grade StE 210-7 Specification covers Seamless circular tubes of non-alloy steel with special quality requirements. Our pipe are been supplied in both Plain Square cut,Deburred Ends or Bevelled End. This can be provided with Mill Standard Varnished ,stencilled and bundle Strapped with end caps fitted. Each Bundle is packed according to the customer requirement for export orders.
DIN 17172 Grade StE 210-7 Carbon Steel Seamless Pipes Pictures