BEST PIPELINE EQUIPMENT CO.,LTD
Your one stop shop for all your piping needs such as Seamless & Welded Carbon / Stainless & Alloy Steel Pipes, Mainly alloy Steel Pipes , Forged Flanges, Butt Weld Fittings, Forged Fittings,
Add to Cart
| Grade : | X1CrNiMoCuN20-18-7 | |||||||||||||
| Number: | 1.4547 | |||||||||||||
| Classification: | Austenitic stainless steel - special grade | |||||||||||||
| Density: | 8 g/cm ³ | |||||||||||||
| Standard: |
|
| Elements not listed in this table shall not be intentionally added to the steel without the agreement of the purchaser except for finishing the cast. |
| C | Si | Mn | Ni | P | S | Cr | Mo | N | Cu |
| max 0.02 | max 0.7 | max 1 | 17.5 - 18.5 | max 0.03 | max 0.01 | 19.5 - 20.5 | 6 - 7 | 0.18 - 0.25 | 0.5 - 1 |
| Rm - Tensile strength (MPa) (+A) | 650-850 |
| Rm - Tensile strength (MPa) (+AT) | 650-850 |
| Rp0.2 0.2% proof strength (MPa) (+AT) | 300 |
| Rp0.2 0.2% proof strength (MPa) (+A) | 300-340 |
| KV - Impact energy (J) transverse, (+A) | +20° 60 | -196° 60 |
| KV - Impact energy (J) longitud., (+A) | +20° 100 |
| A - Min. elongation at fracture (%) (+A) | 30-40 |
| A - Min. elongation at fracture (%) transverse, (+AT) | 30 |
| A - Min. elongation at fracture (%) longitud., (+AT) | 35 |
| Brinell hardness (HB): (+A) | 260 |
| Brinell hardness (HB): (+AT) | 220 |
| Resistance to intergranular corrosion: in the delivery condition - yes; in the sensitized condition - yes Steel shal not be applied at a metal temperature lower than -196 ° C |
| EU EN | USA - | Sweden SS | ||
| X1CrNiMoCuN20-18-7 |
|
|